Installing a New Fence: Easy Steps to Remove the Old One

Many ageing fences may not collapse entirely; instead, they often begin to lean gradually until a panel detaches during a storm, indicating a crucial moment for replacement.

Once you have arranged for a new fence installation, it is essential to remove the existing fence and dispose of it properly—a task often overlooked until the last minute. This guide outlines key considerations to address before dismantling the old panels.

Engage Your Neighbour in Fence Removal Discussions

If the fence acts as a boundary between properties, it is crucial to discuss the removal with your neighbour. This conversation can help prevent potential disputes in the future.

In New South Wales, the Dividing Fences Act 1991 specifies how neighbours can share costs related to a dividing fence and outlines the procedures for reaching an agreement. NSW Fair Trading offers detailed guidance on this matter, including steps to follow if an agreement cannot be reached. Familiarising yourself with this information before removing the old fence can help avoid uncomfortable discussions later on.

Practically, key points to clarify include the timeline for the fence removal, the duration the boundary will remain exposed, and how costs will be split. A brief conversation beforehand can prevent misunderstandings and complications.

Comprehending the Old Fence Removal Process

The specifics of fence removal primarily depend on the type of construction.

Timber paling fences are generally disassembled in a systematic way. Initially, the palings are removed, followed by the rails, and finally, the posts. While the palings can be removed quickly, the posts may present challenges due to their typical concrete anchoring.

Colorbond fences can be taken apart more rapidly but may be cumbersome to handle. Although the sheets detach easily from the rails, they are long, feature sharp edges, and do not stack neatly. Similar to timber fences, the posts are generally set in concrete.

Older boundary fences may also comprise various materials, such as chain wire on steel posts, timber lattice over a low brick base, and sometimes, durable hardwood. The type of material influences both the duration of the removal process and the associated costs.

Determining the Fate of Posts and Footings

This decision should be made prior to removal, as it significantly impacts the fencer’s work more than your own.

Concreted posts can either be excavated with their footings attached, leaving a series of holes along the boundary, or they can be cut off at ground level, leaving the footings in place. The choice depends on where the new fence posts will be positioned. If the new fence aligns with the existing line, the buried footings could complicate the fencer’s job on their first day.

It is advisable to consult with the fencer regarding their preference before scheduling the removal. They will likely provide a clear recommendation, and a quick phone call can prevent complications when they arrive to commence work.

Essential Checks Before Dismantling the Old Fence

Certain older boundary and side fences in Sydney may not consist of timber or steel. Instead, they could be made of flat grey fibre cement sheeting, often attached to steel posts, and in some instances, this material may contain asbestos.

If the fence resembles flat sheeting rather than palings or Colorbond, it is imperative to pause any demolition efforts until you can identify the material. SafeWork NSW and your local council provide resources for recognising these materials and information regarding licensed handlers. This is not a decision to rush during a weekend project; proper identification and understanding of the correct procedures are vital.

Managing Old Fence Timber After Removal

Fence materials can be categorised into distinct groups. Steel posts, Colorbond sheeting, and chain wire form one category, while timber constitutes another. Concrete footings are handled separately.

It is crucial to note that treated pine, commonly used in modern fencing, should not be burned. Burning treated timber releases harmful preservatives into the smoke and ash, making it unsuitable for fire pits, wood heaters, or backyard bonfires. Although old fence palings may seem like a free source of firewood, they are not safe to burn.

Conversely, hardwood palings from genuinely old fences can be valuable if you have a specific use for them. If you wish to retain some for future use, please communicate this preference before the job begins.

Identifying Other Items to Clear Alongside the Old Fence

A fence line rarely remains devoid of debris. Vegetation that has grown alongside the fence and items stored against it often accumulate over time.

• Vegetation along the fence line: creeping plants, overgrown shrubs, and roots that may have contributed to the fence leaning.
• Timber offcuts and old palings: remnants from previous repairs, often leaning against nearby structures.
• Pots and garden edging: items that have remained adjacent to the fence and have not been relocated.
• Old outdoor furniture and equipment: items that have been tucked away out of sight along that side of the yard.
• Green waste from clearing the area: this is necessary for the fencer to work efficiently, generating its own waste load.

To ensure the fence line is fully prepared for the new installation, consolidating all debris into one load optimises the use of the truck and facilitates the fencer’s arrival.

Preparing for the Gap Between the Old and New Fence

Planning for this gap is essential, as it can unexpectedly catch homeowners off guard.

During the interval between the removal of the old fence and the installation of the new one, the boundary will be exposed. If you have dogs, small children, or a pool in your yard, it is crucial to have a plan in place before the removal, rather than scrambling afterwards. Temporary fencing, securing pets indoors, or timing the removal to coincide with the fencer’s arrival are all effective strategies. Failing to have a plan can lead to complications.

If a pool is present, remember that pool barrier regulations still apply even when the boundary fence is down. If the boundary fence is part of the pool barrier, consult your certifier before any removal occurs.

Coordinating Fence Removal Services in Sydney

Our fence removal services are integrated into our comprehensive backyard demolition and junk removal offerings, with debris and cuttings from the fence removal transported in the same vehicle under green waste removal.

When you contact us, please provide details about the fence: the approximate length in metres, whether it is timber, Colorbond, or wire, if the posts are concreted, and any additional items that need to be removed alongside that side of the yard. If a fencer has already scheduled a start date, mention this, as aligning the removal with this date can lead to a smoother process.

Consider two additional resources: the distinctions between council hard waste and private junk removal, which can be beneficial before placing fence timber on the kerb, and the comparison between skip bags and skip bins if you prefer to dismantle the fence yourself over a weekend.

Frequently Asked Questions About Old Fence Removal

Is It Essential to Remove the Old Fence Before the Fencer Arrives?

In most cases, yes. Most fencers prefer a cleared boundary, allowing them to begin setting up on their first day instead of spending valuable time stripping and stacking the old fence. Consult your fencer to clarify their preferences, as some include removal in their services while others do not, which may determine whether you need our assistance.

Can the Concrete Footings from the Old Fence Posts Be Removed?

Yes, the footings can be removed along with the posts, leaving holes in the ground, or the posts can be cut off at ground level, leaving the footings intact. The best choice depends on the positioning of the new posts, so consult with the fencer first and relay their advice before we commence work.

Is Neighbour’s Consent Required for Removing a Dividing Fence?

Since a dividing fence impacts both properties, it is important to discuss the matter with your neighbour rather than making unilateral decisions. The Dividing Fences Act 1991 outlines how neighbours in New South Wales can agree on and share the costs associated with a dividing fence. Ensure this is settled before scheduling the removal.

Can I Keep the Old Palings for Firewood?

Not if they are treated pine, which is common for most modern palings. Burning treated timber is unsafe as it releases harmful preservatives into the smoke and ash. Older hardwood palings are a different matter. If you wish to keep some, please inform us before the job begins, and we will set aside a stack for you.

What Other Items Can Be Cleared Alongside the Fence?

The entire area alongside the fence can be cleared as required. The fence line typically contains overgrown vegetation, old timber leaning against it, and various items stored out of sight. Since the boundary must be cleared for the fencer, consolidating everything into one load is a more efficient use of the truck than scheduling separate removals.